What Pilesgrove, NJ Homeowners Should Know About Surge Protection
It’s late summer, and the wind is picking up. A severe storm is coming to your area. BOOM! BOOM! Your power goes out. The storm passes after an hour and they restore the power. Your HDTV still doesn’t work. An electrical power surge has caused your HDTV to stop working.
In the 48 US states that are contiguous, there are more than 20 million lightning strikes from cloud to ground each year.
Surge protection is an updated electric code that must be applied to all new and upgraded homes. Wiki defines a surge protector as: A surge protector (or surge suppressor or surge diverter [SPD], surge protection device [SPD], or transient voltage surge suppression [TVSS]), is an appliance or device that protects electrical devices from voltage spikes within alternating-current circuits.
Whole house surge protection is protection for your devices, appliances, computers etc. Surges (an increase in electrical voltage) can affect your entire home. Things like lightning strikes on utility lines, work on utility lines, a storm which destroys power lines or falling trees could cause this.
Surge protectors come in two forms. Type 1 is a meter-base surge protector and type 2 is a panel-base surge protector.
Surge Protection Required for Residential Service Upgrades and Replacements
To protect your appliances and other electrical equipment, the main reason why the 2020 NEC Code change requires surge protection for service upgrades or replacements is because of this. It not only protects the people, but it also protects your home. Even if homeowners have insurance, a blown HDTV, computer, or audio system can be very expensive.
Electric fluctuation can be caused by a backup generator. To protect against electric fires and shocks, a home is equipped with AFCIs (arc fault Circuit Interrupters) as well as GFCIs. Smoke detector alarms are also available in homes.
Because of their sensitiveness to control boards, these are the most frequently blown electronics. These devices should be protected with a whole-house surge protection device such as type 1 or type 2 SPDs, to prevent electrical fires from causing serious injury.
FAQs Whole Home Surge Protection
What Does a Surge Protector Do?
Surge protective devices work in the same manner as switches that turn off surge voltage temporarily. This causes a short circuit.
The basic surge protector protects against damage caused by sudden power surges. The surge protector pulls the current from one outlet and passes it to the devices plugged into it.
Do I need surge protection for my house?
Power surges can cause damage to appliances, electronics, and wired services such as security systems. A voltage spike could even cause a fire if there is no surge protection. Install a whole-house surge protector to reduce this risk.
Is it possible to install a surge protector in my entire house?
It is best to hire an electrician when you need electrical work done in your home. Electricity is dangerous and can lead to severe shocks. Incorrect installation of the surge protector could cause damage to the wiring, increase the risk of electric fires, or make it inoperable. It is well worth paying for a professional to install it.
Is surge protection worth it?
Surge protection protects appliances and devices against voltage spikes. Surge protection is essential due to the increased power of appliances and devices. Surge protection is essential because too much voltage can lead to electrical problems or even fire.
Surge protectors for your whole-house are very effective at preventing sudden surges in power entering your home. They can’t stop all power surges. The whole-house surge protector can be bypassed if there is more than 15% excess voltage. You can use plug-in surge protectors to protect sensitive electronics such as TVs and computers. This adds a layer of protection to stop excess power from reaching the whole-house surge protector.
How long can whole-home surge protectors last?
Your surge protector’s life expectancy will depend on how well the device is. Low-quality surge protectors are likely to fail quickly, especially if there are many large power surges. While some models can last for five years or longer, the amount of activity it experiences will affect how long it lasts. The surge protector can be damaged faster than you might expect by frequent power surges. To ensure that your surge protector is still working properly, have an electrician inspect it every now and again.
A whole house surge protector should last between 2-5 years. A surge protector’s functional lifespan is determined by the sum of all the surges it absorbs. It is not measured in years. Any lifespan estimates are therefore likely to be wide.
Who installs surge protectors in whole houses?
Whole-Home Surge Protections: In most cases, whole-house suppressions are hard-wired directly to the service panel. This takes about three hours for a licensed electrician. At a minimum, whole-house systems should be capable of stopping a 40,000-amp surge.
How much does a whole home surge protector cost to install?
A home surge protector can cost anywhere from $450-$1500, depending on which SPD model you choose and the installation requirements of your home. This will depend on your home’s electrical needs and current electrical condition.
You can protect all the electronics in your home for less than the price of a smartphone
The dark clouds roll in and a severe storm may bring lightning It is not the right time to go without a home surge protection system. We are happy to help you install surge protection in your home. Do not let surges cause damage to your electronics, appliances, and computers. Fill out the form below for a FREE Quote.